Step 1:Pre-processing

Log in and navigate to: Print → Manual Pre-processing - Select Application：

• For Base:

  → Flexible Denture → Select Printer → A2D HD → Select Flexible Try-in UV 50μm Settings: Select Straighten Type → Incline with tissue side facing down → Add Supports → Disable the inner wall of snap ring to support → Select Tank Type → HT Resin Tank

• For Teeth:

  → Denture Teeth → Select Printer → A2D HD → Select Temp C&B UV 50μm Settings: Layout by Case → Configure the naming rules for identifying same-case files → Select Tank Type → HT Resin Tank

Import file → Auto steps: Straighten → Layout → Add Supports → Slice Download file or drag to printer to start job

Step 2:3D Printing

• Pre-print:

  Clean platform/tank, install properly. Shake resin, pour, insert resin card. Select task → Start print'

• Post-print:

  Install collection tray → Auto part-removal (avoid touching surface)

Step 3:Washing & Drying

• Solvent: IPA (≥99%) or 95% alcohol

  The base and teeth must be cleaned separately.

• Steps:

  Place in the cleaning box → Fill tank to fully submerge the models Wash 2 min→ Dry with air gun for 30 sec → Replace solvent → Repeat air dry for 15-20 mins

Step 4:Assemble & Curing

• Remove supports → Assemble the teeth and base

• Curing：Place on tray → Select process → Cure under inert gas

Step 5:Finish

• Smoothen → Polish → Clean